Perforated glass panels for 36" balcony and terrace

12 mm tempered glass is the standard for outdoor applications (balconies, terraces, stairs). It provides the structural strength needed to absorb lateral loads and meet building code requirements. 10 mm glass is reserved for indoor use or pool fence gates less exposed to pressure forces.

No. Tempered glass has been heat-treated to withstand impacts and extreme weather variations, including Quebec winters. In the exceptional event of breakage, it shatters into small, non-sharp pieces, unlike ordinary glass—which is a significant safety advantage.

Standard glass is available in predefined sizes and can be ordered directly online. Custom-cut glass is cut to your exact dimensions, essential for atypical configurations such as stair runs, non-standard angles, or spaces with angled cuts. Custom-cut pieces are subject to a dedicated quote and require the submission of precise plans or measurements.

Yes. Tinted glass (smoked grey, bronze) and frosted glass options are available depending on the project and privacy needs. These finishes allow for modulated transparency while maintaining the sleek aesthetic of a glass railing. Consult our team to confirm availability for your application.

Standard tempered glass panels typically come in widths between 24 and 72 inches. Wider or custom configurations are possible but will incur additional production times. The optimal width also depends on the chosen fastening system, whether spigots or clamps, and the distance between anchor points.

The spigot anchors directly into the floor or load-bearing structure and supports the glass panel from below, from outside the walking line. It allows for a minimalist look with no visible posts. Clamps attach to the edge or face of the glass and rest on a post or wall. Spigots are preferred for decks and balconies where an unobstructed view is desired; clamps offer more flexibility for angled configurations or panel junctions.

No. Spigots require a structure strong enough to absorb horizontal loads: concrete, treated wood, or appropriately gauged steel. A lightweight composite deck or hollow box may require reinforcement or necessitate the use of surface clamps rather than ground anchoring. An assessment of the existing structure is recommended before choosing your anchoring system.

According to the Quebec Building Code (RBQ), a handrail is mandatory on any interior staircase with more than two risers and any exterior staircase with more than three risers. For balcony railings, a handrail is not always required if the height and resistance of the glass panel comply with standards. For residential or commercial interior applications, the presence of a handrail is often recommended even without a regulatory obligation.

Both finishes are available: natural stainless steel (polished or brushed) and matte black. The black finish is increasingly popular for its contemporary look, especially on patios with dark furniture or dark wood structures. Both finishes are made of stainless steel with a durable coating or surface treatment.

Yes, provided they are designed and installed in accordance with the requirements of the Quebec Building Code. For an outdoor balcony located more than 1.83 m (6 ft) from the ground, the railing must be at least 91.5 cm (42 in) high. Our products are designed to meet and exceed these requirements. Our valid RBQ license guarantees that every professional installation complies.

Both options are available. Many clients choose self-installation by ordering components (glass, spigots or clamps, handrail) and following our detailed guides available online. For more complex projects, such as stairwells, custom configurations, or structural work, our team offers a turnkey installation service with a guarantee.

That depends on your municipality and the nature of the work. Generally, replacing an existing railing without altering the structure does not require a permit. Building a new balcony, enlarging a deck, or making structural modifications usually entails obtaining a permit from your city. We recommend checking with your municipal department before starting any work.

Allow approximately 10 business days for the production of custom panels, plus the installation scheduling time (which varies depending on the season and project complexity). The installation itself generally takes half a day to a full day. During peak season (spring and summer), lead times may be longer. It is best to plan ahead.

Several options are available to you: use the online configurator to estimate and order your components directly, submit your plans or measurements via the estimation form to receive a customized quote, or make an appointment with an expert. Once the quote is accepted, a manufacturing plan is prepared and production begins within the agreed deadlines.

No, that's one of their main advantages. Cleaning once or twice a year is sufficient in most cases. A standard glass cleaner will do the trick. Late spring cleaning (to remove pollen) and fall maintenance are recommended. Stainless steel hardware requires no special treatment and resists corrosion without intervention.

Yes. Our hardware is made of 316 stainless steel, a highly corrosion-resistant grade suitable for humid environments and salty winters. It is the same grade used in marine applications. No annual surface treatment is required; a simple water cleaning is sufficient to maintain its appearance.

A properly installed tempered glass railing has an almost unlimited lifespan. Glass does not degrade, corrode, or warp over time. Its longevity primarily depends on the quality of the hardware and anchoring, which is why using quality 316 stainless steel components is crucial for the overall durability of the system.

The cost varies depending on the total length to be covered, the type of fastening (spigot or clamp), the chosen finish (natural or black stainless steel), the presence of a handrail, and whether you opt for material only or installation included. As an indication, exterior glass railings start at around $90 per linear foot for materials, and around $175 per linear foot including installation. The online configurator allows you to get a quick estimate based on your dimensions.

Yes. The online store allows you to purchase glass panels (standard or custom-made), spigots, clamps, and handrails separately. This approach is common among builders and contractors who prefer to assemble and install themselves. If you already have an existing structure and are only replacing the glass panels, you can order only the missing parts.

Yes. Delivery is available throughout Quebec. Warehouse pickup is also available for those who prefer to collect their orders in person. For installation projects, our team operates within an extended radius — contact us to confirm availability in your region.